NOTE: The following instructions are intended as a general guide for how
to setup your system to run the e-Motion patches.  There will be many
variables depending on your specific system that cannot be anticipated by
these instructions alone. 

Technical requirements:
- MIDI synthesizer with four audio outputs
- MIDI interface/patchbay with at least two separate MIDI IN/OUT ports
- Two MacIntosh computers running Mac OS 8.6 or better and the ability to
receive video input
- Two video cameras
- Max and Cyclops (distributed by www.cycling74.com) installed and working

External MIDI Synthesizer Setup:
Setup your MIDI synthesizer to playback eight different sounds for MIDI
data received on MIDI channels 1-8.  Route the output of the sounds to
four speakers in the following manner:

MIDI Channel 1 - Speaker 1 - Sound 1
MIDI Channel 2 - Speaker 2 - Sound 2
MIDI Channel 3 - Speaker 3 - Sound 3
MIDI Channel 4 - Speaker 4 - Sound 4
MIDI Channel 5 - Speaker 1 - Sound 5
MIDI Channel 6 - Speaker 2 - Sound 6
MIDI Channel 7 - Speaker 3 - Sound 7
MIDI Channel 8 - Speaker 4 - Sound 8

Physical setup
- Connect the video out of Camera A to the video input of Computer A
- Connect the video out of Camera B to the video input of Computer B
- Connect Computer A to the MIDI interface
- Connect Computer B to the MIDI interface
- Connect the MIDI synth to the MIDI interface
- Setup OMS on Computer A and Computer B to work with interface

Computer A setup:
- Run the Max patch "e-Motion(a)" and follow startup procedure

Computer B setup:
- Run the Max patch "e-Motion(b)" and follow the startup procedure